Welcome to Dongguan Sobick Precision Instrument Co., Ltd.
Unified Service Hotline
13925733543
Advanced Search:
Contact Us

Unified Service Hotline:0769-23883306

Service hours: 9:00-17:30 from Monday to Saturday

Contact person: Mr. Ding

Mobile:13925733543

Mobile:0769-23883306

Fax:0769-22214607

Address: 1st Floor, Building B, CY Creative Industry Park, Jiulong Road, Dongcheng District, Dongguan City, Guangdong Province


News

Maintenance and Maintenance of Quadratic Image Measuring Instrument

Source: Time:2018-05-10 15:00:56 frequency:

1. The instrument should be kept in a clean and dry room (room temperature 20 ~5 C, humidity less than 60%) to avoid surface contamination of optical parts, rust of metal parts, dust and sundries falling into the moving guide rail, which will affect the performance of the instrument.
1. The instrument should be kept in a clean and dry room (room temperature 20 ~5 C, humidity less than 60%) to avoid surface contamination of optical parts, rust of metal parts, dust and sundries falling into the moving guide rail, which will affect the performance of the instrument.
2. After using the instrument, the working face should be wiped clean at any time, preferably covered with dust-proof cover.
3. The transmission mechanism and motion guide of the instrument should be lubricated regularly so as to make the mechanism move smoothly and keep good working condition.
4. Workbench glass and paint surfaces are dirty and can be wiped clean with neutral detergent and water. Never wipe the paint surface with organic solvent, otherwise it will lose its luster.
5. The LED light source of the instrument has a long service life, but when a lamp burns out, please inform the manufacturer of the instrument and let the professionals replace it for you.
6. Precision parts of the instrument, such as image system, worktable, optical ruler and Z-axis transmission mechanism, need to be adjusted precisely. All adjusting and fastening screws are fixed. Customers should not disassemble them by themselves. If there are any problems, please notify the manufacturer to solve them.

7. The software has accurately compensated the error between the worktable and the optical ruler. Do not change it by yourself. Otherwise, erroneous measurement results will be produced.
8. Do not unplug all electrical connectors of the instrument. If unplugged, the screw must be inserted and tightened correctly according to the mark. Improper connection will affect the function of the instrument, and the system may be damaged seriously.

keys: